User Guide#

Quick start#

Create the environment (creates a folder in your current directory)
virtualenv env_name
In Linux or Mac, activate the new python environment
source env_name/bin/activate
Or in Windows
.\env_name\Scripts\activate
Confirm that the env is successfully selected
which python3

Introduction#

Virtualenv has one basic command:

virtualenv venv

This will create a python virtual environment of the same version as virtualenv, installed into the subdirectory venv. The command line tool has quite a few of flags that modify the tool’s behaviour, for a full list make sure to check out CLI flags.

The tool works in two phases:

  • Phase 1 discovers a python interpreter to create a virtual environment from (by default this is the same python as the one virtualenv is running from, however we can change this via the p option).

  • Phase 2 creates a virtual environment at the specified destination (dest), this can be broken down into four further sub-steps:

    • create a python that matches the target python interpreter from phase 1,

    • install (bootstrap) seed packages (one or more of pip, setuptools, wheel) in the created virtual environment,

    • install activation scripts into the binary directory of the virtual environment (these will allow end users to activate the virtual environment from various shells).

    • create files that mark the virtual environment as to be ignored by version control systems (currently we support Git only, as Mercurial, Bazaar or SVN do not support ignore files in subdirectories). This step can be skipped with the no-vcs-ignore option.

The python in your new virtualenv is effectively isolated from the python that was used to create it.

Python discovery#

The first thing we need to be able to create a virtual environment is a python interpreter. This will describe to the tool what type of virtual environment you would like to create, think of it as: version, architecture, implementation.

virtualenv being a python application has always at least one such available, the one virtualenv itself is using, and as such this is the default discovered element. This means that if you install virtualenv under python 3.8, virtualenv will by default create virtual environments that are also of version 3.8.

Created python virtual environments are usually not self-contained. A complete python packaging is usually made up of thousands of files, so it’s not efficient to install the entire python again into a new folder. Instead virtual environments are mere shells, that contain little within themselves, and borrow most from the system python (this is what you installed, when you installed python itself). This does mean that if you upgrade your system python your virtual environments might break, so watch out. The upside of this, referring to the system python, is that creating virtual environments can be fast.

Here we’ll describe the built-in mechanism (note this can be extended though by plugins). The CLI flag p or python allows you to specify a python specifier for what type of virtual environment you would like, the format is either:

  • a relative/absolute path to a Python interpreter,

  • a specifier identifying the Python implementation, version, architecture in the following format:

    {python implementation name}{version}{architecture}
    

    We have the following restrictions:

    • the python implementation is all alphabetic characters (python means any implementation, and if is missing it defaults to python),

    • the version is a dot separated version number,

    • the architecture is either -64 or -32 (missing means any).

    For example:

    • python3.8.1 means any python implementation having the version 3.8.1,

    • 3 means any python implementation having the major version 3,

    • cpython3 means a CPython implementation having the version 3,

    • pypy2 means a python interpreter with the PyPy implementation and major version 2.

    Given the specifier virtualenv will apply the following strategy to discover/find the system executable:

    • If we’re on Windows look into the Windows registry, and check if we see any registered Python implementations that match the specification. This is in line with expectation laid out inside PEP-514

    • Try to discover a matching python executable within the folders enumerated on the PATH environment variable. In this case we’ll try to find an executable that has a name roughly similar to the specification (for exact logic, please see the implementation code).

Warning

As detailed above, virtual environments usually just borrow things from the system Python, they don’t actually contain all the data from the system Python. The version of the python executable is hardcoded within the python exe itself. Therefore, if you upgrade your system Python, your virtual environment will still report the version before the upgrade, even though now other than the executable all additional content (standard library, binary libs, etc) are of the new version.

Barring any major incompatibilities (rarely the case) the virtual environment will continue working, but other than the content embedded within the python executable it will behave like the upgraded version. If such a virtual environment python is specified as the target python interpreter, we will create virtual environments that match the new system Python version, not the version reported by the virtual environment.

Creators#

These are what actually setup the virtual environment, usually as a reference against the system python. virtualenv at the moment has two types of virtual environments:

  • venv - this delegates the creation process towards the venv module, as described in PEP 405. This is only available on Python interpreters having version 3.5 or later, and also has the downside that virtualenv must create a process to invoke that module (unless virtualenv is installed in the system python), which can be an expensive operation (especially true on Windows).

  • builtin - this means virtualenv is able to do the creation operation itself (by knowing exactly what files to create and what system files need to be referenced). The creator with name builtin is an alias on the first creator that’s of this type (we provide creators for various target environments, that all differ in actual create operations, such as CPython 2 on Windows, PyPy2 on Windows, CPython3 on Posix, PyPy3 on Posix, and so on; for a full list see creator).

Seeders#

These will install for you some seed packages (one or more of: pip, setuptools, wheel) that enables you to install additional python packages into the created virtual environment (by invoking pip). Installing setuptools and wheel is disabled by default on Python 3.12+ environments. There are two main seed mechanisms available:

  • pip - this method uses the bundled pip with virtualenv to install the seed packages (note, a new child process needs to be created to do this, which can be expensive especially on Windows).

  • app-data - this method uses the user application data directory to create install images. These images are needed to be created only once, and subsequent virtual environments can just link/copy those images into their pure python library path (the site-packages folder). This allows all but the first virtual environment creation to be blazing fast (a pip mechanism takes usually 98% of the virtualenv creation time, so by creating this install image that we can just link into the virtual environments install directory we can achieve speedups of shaving the initial 1 minute and 10 seconds down to just 8 seconds in case of a copy, or 0.8 seconds in case symlinks are available - this is on Windows, Linux/macOS with symlinks this can be as low as 100ms from 3+ seconds). To override the filesystem location of the seed cache, one can use the VIRTUALENV_OVERRIDE_APP_DATA environment variable.

Wheels#

To install a seed package via either pip or app-data method virtualenv needs to acquire a wheel of the target package. These wheels may be acquired from multiple locations as follows:

  • virtualenv ships out of box with a set of embed wheels for all three seed packages (pip, setuptools, wheel). These are packaged together with the virtualenv source files, and only change upon upgrading virtualenv. Different Python versions require different versions of these, and because virtualenv supports a wide range of Python versions, the number of embedded wheels out of box is greater than 3. Whenever newer versions of these embedded packages are released upstream virtualenv project upgrades them, and does a new release. Therefore, upgrading virtualenv periodically will also upgrade the version of the seed packages.

  • However, end users might not be able to upgrade virtualenv at the same speed as we do new releases. Therefore, a user might request to upgrade the list of embedded wheels by invoking virtualenv with the upgrade-embed-wheels flag. If the operation is triggered in such a manual way subsequent runs of virtualenv will always use the upgraded embed wheels.

    The operation can trigger automatically too, as a background process upon invocation of virtualenv, if no such upgrade has been performed in the last 14 days. It will only start using automatically upgraded wheel if they have been released for more than 28 days, and the automatic upgrade finished at least an hour ago:

    • the 28 days period should guarantee end users are not pulling in automatically releases that have known bugs within,

    • the one hour period after the automatic upgrade finished is implemented so that continuous integration services do not start using a new embedded versions half way through.

    The automatic behaviour might be disabled via the no-periodic-update configuration flag/option. To acquire the release date of a package virtualenv will perform the following:

    • lookup https://pypi.org/pypi/<distribution>/json (primary truth source),

    • save the date the version was first discovered, and wait until 28 days passed.

  • Users can specify a set of local paths containing additional wheels by using the extra-search-dir command line argument flag.

When searching for a wheel to use virtualenv performs lookup in the following order:

  • embedded wheels,

  • upgraded embedded wheels,

  • extra search dir.

Bundled wheels are all three above together. If neither of the locations contain the requested wheel version or download option is set will use pip download to load the latest version available from the index server.

Embed wheels for distributions#

Custom distributions often want to use their own set of wheel versions to distribute instead of the one virtualenv releases on PyPi. The reason for this is trying to keep the system versions of those packages in sync with what virtualenv uses. In such cases they should patch the module virtualenv.seed.wheels.embed, making sure to provide the function get_embed_wheel (which returns the wheel to use given a distribution/python version). The BUNDLE_FOLDER, BUNDLE_SUPPORT and MAX variables are needed if they want to use virtualenv’s test suite to validate.

Furthermore, they might want to disable the periodic update by patching the virtualenv.seed.embed.base_embed.PERIODIC_UPDATE_ON_BY_DEFAULT to False, and letting the system update mechanism to handle this. Note in this case the user might still request an upgrade of the embedded wheels by invoking virtualenv via upgrade-embed-wheels, but no longer happens automatically, and will not alter the OS provided wheels.

Activators#

These are activation scripts that will mangle with your shell’s settings to ensure that commands from within the python virtual environment take priority over your system paths. For example, if invoking pip from your shell returned the system python’s pip before activation, once you do the activation this should refer to the virtual environments pip. Note, though that all we do is change priority; so, if your virtual environments bin/Scripts folder does not contain some executable, this will still resolve to the same executable it would have resolved before the activation.

For a list of shells we provide activators see activators. The location of these is right alongside the Python executables: usually Scripts folder on Windows, bin on POSIX. They are called activate, plus an extension that’s specific per activator, with no extension for Bash. You can invoke them, usually by source-ing them. The source command might vary by shell - e.g. on Bash it’s source (or .):

source venv/bin/activate

The activate script prepends the virtual environment’s binary folder onto the PATH environment variable. It’s really just convenience for doing so, since you could do the same yourself.

Note that you don’t have to activate a virtual environment to use it. You can instead use the full paths to its executables, rather than relying on your shell to resolve them to your virtual environment.

Activator scripts also modify your shell prompt to indicate which environment is currently active, by prepending the environment name (or the name specified by --prompt when initially creating the environment) in brackets, like (venv). You can disable this behaviour by setting the environment variable VIRTUAL_ENV_DISABLE_PROMPT to any value. You can also get the environment name via the environment variable VIRTUAL_ENV_PROMPT if you want to customize your prompt, for example.

The scripts also provision a deactivate command that will allow you to undo the operation:

deactivate

Note

If using Powershell, the activate script is subject to the execution policies on the system. By default, Windows 7 and later, the system’s execution policy is set to Restricted, meaning no scripts like the activate script are allowed to be executed.

However, that can’t stop us from changing that slightly to allow it to be executed. You may relax the system execution policy to allow running of local scripts without verifying the code signature using the following:

Set-ExecutionPolicy RemoteSigned

Since the activate.ps1 script is generated locally for each virtualenv, it is not considered a remote script and can then be executed.

A longer explanation of this can be found within Allison Kaptur’s 2013 blog post: There’s no magic: virtualenv edition explains how virtualenv uses bash and Python and PATH and PYTHONHOME to isolate virtual environments’ paths.

Programmatic API#

At the moment virtualenv offers only CLI level interface. If you want to trigger invocation of Python environments from within Python you should be using the virtualenv.cli_run method; this takes an args argument where you can pass the options the same way you would from the command line. The run will return a session object containing data about the created virtual environment.

from virtualenv import cli_run

cli_run(["venv"])
virtualenv.cli_run(args, options=None, setup_logging=True, env=None)#

Create a virtual environment given some command line interface arguments.

Parameters:
  • args – the command line arguments

  • options – passing in a VirtualEnvOptions object allows return of the parsed options

  • setup_loggingTrue if setup logging handlers, False to use handlers already registered

  • env – environment variables to use

Returns:

the session object of the creation (its structure for now is experimental and might change on short notice)

virtualenv.session_via_cli(args, options=None, setup_logging=True, env=None)#

Create a virtualenv session (same as cli_run, but this does not perform the creation). Use this if you just want to query what the virtual environment would look like, but not actually create it.

Parameters:
  • args – the command line arguments

  • options – passing in a VirtualEnvOptions object allows return of the parsed options

  • setup_loggingTrue if setup logging handlers, False to use handlers already registered

  • env – environment variables to use

Returns:

the session object of the creation (its structure for now is experimental and might change on short notice)

class virtualenv.run.session.Session(verbosity, app_data, interpreter, creator, seeder, activators)#

Represents a virtual environment creation session.

property verbosity#

The verbosity of the run.

property interpreter#

Create a virtual environment based on this reference interpreter.

property creator#

The creator used to build the virtual environment (must be compatible with the interpreter).

property seeder#

The mechanism used to provide the seed packages (pip, setuptools, wheel).

property activators#

Activators used to generate activations scripts.